Epson WirelessHD Bedienungsanleitung Seite 9

 Take care when handling the power plug. If you do not handle the plug correctly, it
could cause fire and electric shock to occur.
- Do not plug multiple power cables in a single electric outlet.
- Do not insert the plug into an electrical outlet if there are any foreign substances,
such as dust, stuck to the plug.
- Make sure the plug is completely inserted into the electrical outlet.
- Do not handle the plug with wet hands.
- Do not remove the plug by pulling on the power cable. Make sure you grip the plug
itself.
 Do not spill liquids, such as drinks, into the AC adapter, and do not spray it with
insecticide. It could cause malfunction, fire, and electric shock to occur. If you do spill
liquid into the AC adapter, turn off the power, unplug the power plug, and then contact
your local dealer. If you continue to use the AC adapter in this condition, it could cause
fire and electric shock to occur.
 Do not use the product in a confined location or if it is covered by a cloth. This could
cause unexpected problems and injuries such as overheating and burns to occur.
 Do not use when the power cable is wrapped around the AC adapter. This could
damage the cable and cause unexpected overheating to occur.
 Do not install the product in poorly ventilated locations such as on an AV rack or in a
cabinet. Overheating could cause malfunctions to occur.
 When using the WirelessHD Transmitter, make sure there is nothing covering the vents
and that it is placed on a flat surface at least 5 cm away from anything around or above
it.
 Avoid locations subject to high temperatures such as close to heaters.
 If the product is being used continuously, make sure it is at least 20 cm away from
anyone in the surrounding area.
 The antenna for the WirelessHD Transmitter is on the front of the product. If you are
close to the WirelessHD Transmitter, do not look at it for long periods of time.
Caution
9