WOLFF DURO-STRIPPER Betriebsanleitung Seite 9

1.0 Technical Data
Power supply . . . . . . . . . . . . . . . . . . . .
Power consumption . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Number of strokes . . . . . . . . . . . . . . . . . . . .8500 strokes/min
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . .88 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . .101 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . .16 m/s
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16kg
2.0 Declaration of conformity
We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: EN 50 144, according to the provisions of the
Directives 73/23/EWG, 89/336/EWG 98/37 EG
05
Dipl.-Ing. (FH) Dieter Hammel
Konstruktionsleitung
i.V.
WOLFF | Eine Marke der Uzin Utz Gruppe | D-71665 Vaihingen/Enz | Dieselstraße 19
3.0 Safety instructions
Disconnect the power supply before any maintenance is carried
out. Use only the recommended blades and ensure it is sharp
before starting.
Maintenance should be undertaken only by qualified personnel.
Use only genuine WOLFF spare parts.
See supplementary sheet "General safety instructions"
Transport
To avoid harm or danger, always remove the blade before trans-
porting the machine.
Using this machine without ear protectors may jeopardize or
harm your health. It may harm especially your ears and increase
the risk of an accident.
DURO-STRIPPER, Artikel-Nr. 013347
09/2004
.230 V AC (115V AC)
.2000 W; 9,1A (1900W; 17,6A)
.with current limitor
Comes with:
DURO-STRIPPER
Blade 210 x 60 x 1 mm
Blade 210 x 60 x 0,7 mm
Tool kit
Ear protectors
Operation manual
2
Safety gloves
Thread Plug
Always wear ear protectors!
9