Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Unit structure
A
B
C
D
A - LCD screen
B - Backlit buttons
C - Status LED (red/green)
D - USB port (support service only)
E - Power inlet
NOTICE: never connect the unit to the USB port.
The USB port can only be used by support
technicians. Any intervention or alteration may
cause malfunctions of the e-toll payment system
and sanctions by the service provider.
Autostrade Tech SpA cannot be held liable for
improper unit use.
Telepass SAT | Installation Instruction v. 2.2 OCT 2018 | © 2016-2018 Autostrade Tech
PERMANENT UNIT INSTALLATION
Installation types
E
This manual explains how to install and permanently
connect the unit to the vehicle electrical system
(permanent installation).
Position on the windshield
Install in the windshield area as indicated below:
- within a 20 cm band, 10 cm over the idle windshield
wiper line
- between the windshield median line and center of
the steering wheel.
To identify the shielded windshield zones, please refer to
the vehicle documentation.
20 cm
10 cm
EN
23
Werbung
