urmet 1092/256HZ Bedienungsanleitung Seite 19

OPERATING FEATURES
MENU setting
TO SELECT THE REGULATIONS AND THE VIDEO OUTPUT
The 1092/256HZ camera may use 3 different video outputs, which are on the same BNC connector:
•
High-definition 1080P AHD (Analog High Definition) video output
•
CVBS standard interlaced video output
•
Video output in COMET mode
Press the central button IN THE CENTRE to access the OSD menu of the camera.
Press the button RIGHTWARDS OR LEFTWARDS to change the camera focus.
Press the button UPWARDS OR DOWNWARDS to change the camera zoom.
CVBS and AHD standards can be selected by holding the button pressed in the CENTRE. The control
alternatively selects the CVBS and AHD standards.
Use of the COMET video mode can be selected with the CVBS video signal by means of an option in the
OSD menu (ADJUST menu).
NOTE: COME option is available only with the CVBS video output.
The presence or absence of this option therefore permits to identify if the camera is using the CVBS or
AHD video output.
MENU USE
The camera ref. 1092/256HZ uses a multi-level menu that allows to enable/disable or change camera
settings.
To have access to the main menu button, with the camera switched on and operating, unscrew the front
cover to gain access to camera adjustments.
Important note:
•
The OSD menu activation button is joystick type; it is used to make selection operations easier.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed pressing the central button, the access first screen
will be displayed.
Displayed items can be selected by pressing the down button.
Once the item has been selected, the parameter can be changed using the right button and choosing
among the available options, that can be displayed by pressing repeatedly the button.
By selecting the item associated to the symbols
where other changes can be performed.
DS1092-242
LEFT
or it is possible to access to the next submenu,
UP
SET RIGHT
DOWN
19