XZENT 2-DIN Naviceiver X-302BT Bedienungsanleitung Seite 20

SETUP DISPLAY
1
9
Operation buttons Setup Display
1. Source
2. Clock Time
3. Color
4. Contrast
5. Brightness
6. Day/Night
7. Calibration HMI
8. Calibration Navigation
9. General
10. Safety
11. Display
12. Audio
13. Software
14. Misc
*Note on Brightness
Brightness values between 10 and 20 are used for DAY mode. Brightness values between 0 to 9
are used for NIGHT mode. The system will correctly assign values to each mode automatically.
*Note on selection of DAY/NIGHT mode
If set to AUTO, the DAY and NIGHT mode of the device is in sync with the cars headlights (ON
= Night-mode, OFF=Day-mode). If local traffi c laws require daytime running lights for your car,
you can use the manual mode in setup or main menu to set this function.
20
setup
3
4
5
6
7
8
10 11
Tap to enter Main Menu
Shows clock time
Tap to set color (for video playback only)
Tap to set contrast (for video playback only)
Tap to set brightness*
Tap to change modus (DAY > NIGHT > Auto)*
Tap to calibrate XZENT TFT screen
Tap to calibrate NAV (only X-302BT)
Tap to enter general mode
Tap to enter safety mode
Tap to enter display mode, if not already active
Tap to enter audio mode
Tap to enter software mode
Tap to enter misc mode
12 13
2
14