Keenray EL20 Bedienungsanleitung Seite 9

Please make sure the unit is not plugged and the switch is turned to "O"
setting prior to assembling the machine.
1. Position the feeding chute on the Motor
Base:
The arrow"▲" of the Feeding Chute aligns
with of the Motor Base; then twist counter
clockwise until the arrow ▲ of the feeding
chute aligns with the lock
3.Position the Cover into the Feeding Chute:
The arrow"▲" of the Cover aligns with the
lock of the Feeding Chute ；then twist
counterclockwise until the arrow ▲ of the Cover
aligns with the lock
ASSEMBLING METHOD
of the Motor Base.
of the Feeding Chute.
2. Install the Auger and Filter into the Feeding
Chute until you can't push.
4.Position the Juice Cup under the spout of
the juice and a Pulp Cup under the spout of
the pulp.
06