Keenray EL20 Bedienungsanleitung Seite 10

DISASSEMBLING METHOD
NOTE :
If the juicer gets overheated, it will turn off automatically to protect the
machine. In this case, please turn off the juicer. Wait 10 minutes to let the
juicer cool down and then turn it on again.
Then, please follow the steps below :
To disassemble the unit after using and before cleaning. Please make sure
to disconnect the juicer from the power source.
1 .Make sure the power cord is unplugged
and remove the Juice Cup and Pulp Cup.
3.Remove the Filter and Auger in turn, if it
is too hard to pull, swings lightly,then pull
out.
Note:
This machine is not suitable for ice or particularly hard or starchy ingredients such as sugar
cane, avocado, bananas, figs, mangoes and papayas, dragon fruit, strawberries, and seedless
grapes. They can clog the stainless steel screen.
2. Remove the Cover:
Twist the Cover clockwise，until the ▲ on
the Cover aligns with the lock
Feeding Chute,then pull out the Cover.
4. Remove the Feeding Chute:
Press and hold the button first, twist the
Feeding Chute with clockwise，until the ▲
on the feeding chute aligns with the lock
of the Motor Base, then pull out the Feeding
Chute.
07
of the