Keenray EL20 Bedienungsanleitung Seite 13

Trouble
The juicer stops
running suddenly.
The juice yield is low or
juice flows out of the
main housing.
Abnormal noise.
The chute & strainer
assembly cannot be
opened.
The juicing cup is
deformed or shaken.
TROUBLE SHOOTING
Cause
Too many ingredients put into the
juicer.
Hard fruits or vegetables have not
been cut into small pieces.
The bowl and the silicone valve are
not installed properly.
Parts cause extrusion sound during
squeezing.
There are too many pulps inside
the bowl.
There are hard foods stuck inside.
The pulp mess is stuck.
The juicing cup is deformed or
shaken during the juicing process.
Switch to "R" position instantly
to make the ingredients return
upwards. If the machine still stops
running, please clean the
machine before use.
Hard fruits and vegetables (such
as carrots) shall be cut into thin
strips or small cubes before
putting into the chute.
Please re-install the bowl silicone
valve by referring to the
installation method.
The sound is caused by extrusion
of fruits and vegetables, which is
a normal phenomenon.
Press switch to "R" setting to eject
the pulps backward.
Press switch to "R" to eject the
object backward.
Pour water into the chute to soften
the stuck pulp mess overnight.
It is normal that the juicer cup is
slightly shaken or deformed
during the working process of the
appliance, and it is not a
malfunction. Please don't worry.
10
Solutions