HIKMICRO SP Serie Kurzanleitung Seite 12

No. Description
30 Indicator
Micro HDMI
31
Interface
Battery
32
Compartment
Lens Release
33
Button
2. Remove the Battery (Page 4 – B)
Steps
1. Turn off the device.
2. Push the battery compartment lock leftwards to unlock the
battery compartment, and then open the battery cover.
3. Push the inner battery lock (in the black circle) leftwards to
release the battery.
4. Take the battery out of the battery compartment.
Note: If you want to install the battery back, push the battery into
the battery compartment. The battery makes a click when it locks in
place.
3. Charge the Battery
After the device starts up, the OSD (on-screen display) shows the
battery status. When the battery is low, charge the device and
ensure it works properly.
For the first charge, charge the device for 2 hours.
3.1 Charge Device via Type-C Interface (Page 5 – C - ①)
Steps
1. Put the battery into the battery compartment of the device.
Function
Indicate the charging status of the
device.
 Solid red: Charging normally.
 Flashing red: Charging
exception.
 Solid green: Fully charged.
Connect the device with HDMI
cable. A cable converter (HDMI
Type D to HDMI Type A) is included
in the carrying case.
Install the battery in it.
Unlock the interchangeable lens.
10