Veripart VPKVC144Z Benutzerinformation Seite 30

3.2 REVERSING THE DOOR SWING
1. Make sure that your fridge freezer
combination is unplugged.
2. Pry the hinge cover up and off,
remove the three screws that secure
the upper hinge to the door, then
remove the hinge.
3. Remove the refrigerator compartment
door from the cabinet.
4. Remove the two screws that secure the
centre hinge.
5. Remove the freezer compartment door.
6. Remove the screws that secure the
lower hinge to the right side of the
cabinet, then remove the hinge.
7. Remove the bottom ring and nut
securing the pin shaft to the right hole
on the lower hinge, then remove the
shaft.
8. Insert the pin shaft into the left hole on
the lower hinge, then secure the shaft
with the washer and nut.
Refrigerator compartment door
Center hinge
Screws
30
Hinge cover
Screws
Upper hinge
Lower hinge
Screws
Pin shaft
Pin shaft