Quax 63 01 Serie Handbuch Seite 17

63 01 xx
4. Assembling the veil support
Step 1 : installation of the support
Push the lower tube (B) of the support upright on the fl ange of the foot (A). First apply a
spring washer (F) to a bolt (E), then a steel washer (G). Now tighten the bolt with wash-
ers in the tube. Repeat for the second fastening. Push the upper tube (C) of the support
upright on the fl ange of the lower tube. First apply a spring washer (F) to a bolt (E), then
a steel washer (G). Now tighten the bolt with washers in the tube. Push the ring (D) of the
support upright on the fl ange of the upper tube. First apply a spring washer (F) to a bolt
(E), then a steel washer (G). Now tighten the bolt with washers in the tube.
Step 2 : attaching the veil 03HE-0xx
Put the metal ring (D) through the loop in fabric situated 8 cm beneath the top of the veil.
If the ring of the support opens at the front :
Pull the fabric through the loop from back to front.
If the ring of the support opens at the back :
Pull the fabric through the loop from front to back.
Step 3 : Close the ring (D) with the small tube in pvc.
Hemelstaander
Schleier Unterstützung
Support de voile
Veil support
Quax Quax
First dreams First dreams
® ®
First steps First steps
17