Herunterladen Diese Seite drucken

STM Twin 0+ Montage- Und Gebrauchsanleitung Seite 12

Gruppe 0+ (-13 kg)

Werbung

D
GB
4378-4-02/1
Rasten Sie die Schale in die
vordere Verankerung ein.
Prüfen Sie durch anheben,
ob die Schale hinten und
vorne eingerastet ist.
Lock the front fittings of the
infant carrier into the front
anchor points of the Isofix
base. Lift to check that the
infant carrier is securely
Klick
locked at both the front and
back.
16
Drücken Sie die beiden gel-
5069-4-01/1
ben Knöpfe (A) um die Sper-
re für die erste Raste zu lö-
sen. Danach können Sie das
System ohne Drücken der
gelben Knöpfe nach hinten
bis kurz vor das Fahrzeug-
polster schieben.
A
Press both of the yellow
buttons (A) in order to
release the first notch. You
can now push the system
back in the direction of the
car upholstery without
pressing the yellow buttons;
it comes to a halt just before
17
making contact with the
5070-4-00/1
upholstery.

Werbung

loading

Verwandte Produkte für STM Twin 0+