Automatic Operation; And Closing Times - Superrollo GW60 Bedienungsanleitung

i
14. Automatic operation; setting the opening and closing times
Same switching times every day
You can set an opening and closing time for the belt winder which is applicable every
day. Once this time is reached, the roller shutters will open or close automatically.
Changing the switching times
You can change the switching times at any time. Please note that storing a new time
will delete the old settings.
NOTE
u In order to set the switching times, you have to carry out this step once in
order to set the time at which your roller shutters are to open or close. For example,
to 8:00, in order to open your roller shutters every morning at 8:00 hours.
u You must set at least one switching time, in order to activate automatic operation.
u If you change the opening and / or closing times, your settings will not be executed
before the next day.
Setting an opening time (s) (e. g. 8:00 AM)
1.
Briefly press the buttons
simultaneously.
2.
The clock setting indicator light
flashes ...
...and the roller shutters move up.
Automatic mode is now activated. Your
roller shutters will now open every
morning automatically at 8.00 AM.
Setting a closing time (t) (e. g. 20:30 hours)
1.
Briefly press the buttons simulta-
neously.
2.
The clock setting indicator light
flashes ...
...and the roller shutters move down.
Automatic mode is now activated. Your
roller shutters will now close every
evening automatically at 20.30.
+
Clock indicator light
+
Clock indicator light
GB
77