Superrollo GW60 Bedienungsanleitung Seite 62

i
9. Flush-mounted installation
9.
Screw the belt winder into place.
Slide the belt winder into the belt box
and screw it into place with the inclu-
ded installation screws.
IMPORTANT
Pay attention to the connection cables.
Feed both connection cables along the
bottom of the belt winder and through
the notches in the installation frame,
as described on page 61.
10.
Open the operating panel.
The operating panel can be opened
by pressing and levering with a flat-
headed screwdriver.
62
GB