Herunterladen Diese Seite drucken

Doepke Dupline DWS 1 Bedienungsanleitung Seite 5

Wasserstoppsensor

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Doepke
dead.
Connections between the Dupline signal and earth potential will cause malfunctions and
are not permissible. In addition check for correct polarity of the Dupline signal.
The following table illustrates the connection configuration:
Terminal
1
Dupline signal conductor + (D+)
13. Guarantee
All professionally installed, unaltered devices are covered by warranty during the statu-
tory guarantee period from the day of purchase by the end user. The guarantee is not
applicable to damage incurred during transport or caused by short-circuit or overloading.
In the event of defects in workmanship or material, which are discovered within the guar-
antee period, the company will provide a replacement free of charge.
14. Technical Data
Dupline
Current input
Input channels 2 input signals (alarm / live Signal)
Output channels None
Inputs
Rated voltage
Trigger resistance
Operating Voltage
Rated operating voltage Not required (supplied by Dupline signal line)
Terminals
Contact area
Housing
General technical data
Ambient temperature
Encl. protection type /
Order number, description 09 501 197, Water sensor DWS 1
3931247/2009.03/B - The right to make technical changes reserved!
Description
Type integrated
150 k
Type Screw terminals
0.4 mm 
Type White surface-mounted housing
Dimensions 70 x 40 x 16 (W x H x D in mm)
Material ABS
-20°C
IP 67
standards
Terminal
2
Dupline signal conductor - (D-)
Min.
Typ.
1,3 mA
Description
Max.
8 VDC
470 k
0.8 mm²
+50°C
5

Werbung

loading