ADE Gina Bedienungsanleitung Seite 17

Start-up
Inserting/changing batteries
For use you need 3 batteries of type LR03 (AAA), 1.5 V (included). The battery
compartment is located on the underside of the device.
1. Push the locking tab of the battery compartment cover towards the battery
compartment and remove the cover.
2. Insert the batteries as indicated at the bottom of the battery compartment. Pay
attention to the correct polarity (+/-).
3. Replace the battery compartment cover.
The locking tab must snap audibly into place.
Suggestions for changing the battery:
‚ A change of batteries becomes necessary when "Lo" appears on the
display, or when nothing at all is displayed.
‚ Only use the type of battery that is specified in the "Technical data".
‚ Always change all batteries at the same time.
‚ Dispose of old batteries in an environmentally appropriate way (see
"Disposal").
‚ Calibrate the scale, see "Setting up the scale".
Switching on voice playback
The measured weight can also be voiced at the end of the weighing process. You can
choose among the following languages:
German (DE), English (EN), French (FR), Spanish (ES), and Italian (IT)
1. To switch on the scale, step on the middle of the weighing surface.
2. To switch on voice playback, turn the small dial beyond the resistance point
("CLICK").
3. Select the desired volume level using the scale
4. Tap the small button below the language abbreviations to select the desired
language. Note the display.
Choosing the unit of measurement
The unit of measurement is permanently linked to the set language.
Language
DE, FR, ES, IT
EN
BE 2011 bathroom scale
Indicator Unit of measurement
kg Kilogram
lb Pound
-
.
+
Start-up
17