Testing The Network Connection - Pioneer XV-BD422B Bedienungsanleitung

 Setting the proxy server
Only set the proxy server if so instructed by
your Internet service provider.
1. Select and set Network d Proxy Server
d Next Screen.
Use / to select, then press ENTER.
2. Select and set Use or Not use at Proxy
Use / to change, then press .
Server.
y Use – Select this when using a proxy
server.
y Not use – Select this when not using a
proxy server.
If you have selected Use, proceed to step 3.
3. Select and set Server Select Method. Use / to change, then press .
y IP Address – Input the IP address.
y Server Name – Input the server name.
Use the number buttons (0 to 9) to input the
4. Input IP Address or Server Name.
number if you select IP address in step 3.
Use / to move the cursor.
When Server Name is selected in step 3,
use the number buttons (0 to 9) to launch
the software keyboard. Now use / / /
to select characters and items, then press
ENTER to input.
5. Input Port Number.
Press , then use the number buttons (0 to
9) to input the number.
6. Press ENTER to set.
 Displaying the network settings
 Select and set Network d Information
d Next Screen.
Use / to select, then press ENTER.
The MAC address, IP address, subnet mask,
default gateway and DNS server (primary
and secondary) settings are displayed.
When Auto Set IP Address is set to On, the
values obtained automatically are displayed.
Note
y [0.0.0.0] is displayed when each IP address has
not been set.
 Testing the network connection
 Select and set Network d Connection
Test d Start.
Use / to select, then press ENTER.
test is completed. If any other message is [Network is OK.] is displayed once the
displayed, check the connections and/or
settings (pages 33 and 62).
 Changing to other language at
language setting
1. Select and set Language. Use / to select, then press ENTER.
2. Select and set OSD, Audio, Subtitle or
Use / to select, then press ENTER.
Menu
Use / to select, then press ENTER.
3. Select and set the desired language.
Note
y If a language not recorded on the BD/DVD
is set, one of the recorded languages is
automatically selected and played.
 Erasing data that has been added to
BDs and application data
Use this procedure to erase data that has
been added to BDs (data downloaded with
the BD-LIVE function and data used with
the BONUSVIEW function) and application
data.
Caution
y Some time is required to erase the data.
y Do not unplug the power cord while data is
being erased.
1. Select and set BUDA d BUDA Setup.
Use / to select, then press ENTER.
2. Select and set Fmt buda. Press ENTER.
Advanced settings 63
En
8