Arc (Audio Return Channel) Function; Video Connection - Pioneer XV-BD422B Bedienungsanleitung

ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV
to send the audio stream to HDMI OUT of this
player.
To use this function:
- Your TV must support the ARC function.
- The setting method of ARC may differ
depending on the TV. For details about ARC
function, refer to your TV manual.
- You must use the HDMI cable (High Speed
HDMI /™ Cable).
®
- You must connect with the HDMI IN of TV
that supports the ARC function using the
HDMI OUT on this player.
- You can connect only one Home Theater to
TV compatible with ARC.
- The ARC function does not warrant that the
function works in all cases even if the above
conditions are satisfied.
- When you use the ARC function, CEC
(Consumer Electronics Control) may work.
If you do not want to use CEC, you can stop
it work by setting [Control: Of] on HDMI. In
this case, it is needed to connect TV and this
player by an optical cable to send the audio
stream to this player.
- Power on the unit when using CEC function.
- CEC does not operate during Standby mode.

Video connection

Connect the VIDEO OUT terminal on the player
to the video in terminal on the TV using a video
cable. You can hear the sound through the
system's speakers.
Rear of the unit
Video cable
Connecting 29
En
2
TV