Restoring All The Settings To The Factory Default Settings - Pioneer XV-BD422B Bedienungsanleitung

66 Advanced settings
En
 Updating using a USB flash drive/disc
Note
y When an update file is provided on the Pioneer
website, use your computer to download it
onto a USB flash drive or disc. Carefully read
the instructions on downloading update files
provided on the Pioneer website.
y Store the update file in the root directory of the
USB flash drive or disc. Do not store it within a
folder.
y Do not put any files other than the update file
on the USB flash drive or disc.
y To update using a disc, use a CD-R or CD-RW
disc.
y The player supports USB flash drive formatted
in FAT32/16. When formatting a USB flash
drive on your computer, do so with the settings
below.
– File system: FAT32
– Allocation unit size: Default allocation size
y Only store the most recent update file on the
USB flash drive or disc.
y Do not use a USB extension cable to connect
a USB flash drive to the player. Using a USB
extension cable may prevent the player from
performing correctly.
y Steps 1 to 5 are the operations performed by
the user.
y Steps 6 to 7 are the operations performed
(automatically) by the player (they are intended
to update the software).
1. Plug in the USB flash drive or load the
disc on which the update file is stored.
2. When playback is stopped, display the
Press HOME MENU.
Home Menu screen.
Use / to select, then press ENTER.
3. Select and set Initial Setup.
4. Select and set Options d Update d
8
Disc or USB Storage d Start.
Use / to select, then press ENTER.
5. Select and set Yes. Use / / / to select Yes, then press
ENTER.
6. Updating starts.
y Software updating may take a certain
period of time.
7. Updating completes.
Restoring all the settings to
the factory default settings
1. Check that the player's power is turned
on.
2. When playback is stopped, display the
Press HOME MENU.
Home Menu screen.
Use / to select, then press ENTER.
3. Select and set Initial Setup.
4. Select and set Options d Load Default
d Next Screen.
Use / to select, then press ENTER.
5. Select and set OK. Use / to select, then press ENTER.
6. Press  STANDBY/ON to turn off the
power.
7. Press  STANDBY/ON to turn on the
power.
Note
y After restoring all the settings to the factory
default settings, use Setup Navigator to reset
the player (page 36).