Herunterladen Inhalt Inhalt Diese Seite drucken

Usb Device Connection; About Usb Devices; Connecting The Usb Device - Pioneer XV-BD422B Bedienungsanleitung

Blu-ray disc mehrkanal-system; blu-ray disc receiver; lautsprechersystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 162

USB device connection

About USB devices

The USB devices that can be connected to the
player are as shown below.
• USB 2.0-compatible memory devices
• FAT16 or FAT32 file system, minimum 1 GB
capacity (2 GB or more recommended)
Note
• Devices formatted with a file system other than the
above cannot be used.
• USB devices may not be recognized if they contain
multiple partitions.
• Some USB devices may not operate with this
player.
• Operation of USB devices is not guaranteed.

Connecting the USB device

Caution
• Be sure to turn the player's power off before
connecting or disconnecting USB devices.
• Use empty USB devices (on which nothing is
stored).
• When using an external hard disk as the external
storage device, be sure to turn on the hard disk's
power before turning on the player's power.
• If the USB device is write-protected, be sure to
disable the write-protection.
• When connecting the USB cable, hold onto the
plug, set the plug in the proper direction for the
port and insert it horizontally.
• Placing excessive loads on the plug may result in
poor contact, making it impossible to write data on
the USB device.
• When a USB device is connected and the player's
power is turned on, do not unplug the power cord.
• USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
• If more than one USB device is connected, the
number displayed for the USB device may change
depending on the type of device connected or
circumstance. To confirm USB device number, go
to [HOME MENU] d [Home Media Gallery].
This player can play movie, music and photo
files contained in the USB device.
1. Insert a USB device to the USB port until it
fits into place.
Note
• Devices may not work if connected to the USB port
via a memory card reader or USB hub.
• Use a USB cable with a length of 2 meters or less.
• When inserting the USB terminal, support the
top of the unit with your hand to prevent it from
moving.
Connecting
35
En
2

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis