DJI INSPIRE 2 Bedienungsanleitung Seite 7

— Solid Yellow
Buzzer Beeping Description
Toggle the buzzer switch to turn on/off the warning sound.
Descriptions
Toggle the buzzer switch to turn it on
Connect to the Battery Charger
A battery pair is fully charged
Four Intelligent Flight Batteries are fully charged
Updating the Firmware
DJI will release firmware updates when available. Refer to the official DJI website and
follow the instructions below to update the firmware.
1. Download the latest firmware update program from the official DJI website.
(http://www.dji.com/inspire-2/info#downloads)
2. Turn on the Charging Hub, then connect it to a computer using a Micro USB
cable.
3. Run the firmware update program. Press the update button and wait for the
process to finish.
4. The Charging Hub will automatically restart when the update has been successfully
completed.
5. Repeat this process if the firmware update fails for any reason.
Ready to charge
Beeping Pattern
Quick beeping
Quick beeping
Quick beeping
Alternating two short and one
long beeps, last for about 1 hour
©
2016 DJI All Rights Reserved.
7