Operating Determinations - EuroLite LED Fiber Light FIB-203 Bedienungsanleitung

The control unit falls under protection class III. The device always has to be operated with the included
power unit. Always plug in the power unit last. The power plug must always be inserted without force. Make
sure that the plug is tightly connected with the outlet.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
Keep away children and amateurs from the device! There are no serviceable parts inside the device.
Maintenance and service operations are only to be carried out by authorized dealers.
Battery Notice
Batteries are hazardous waste which need to be disposed of appropriately. If the device is to be disposed,
the batteries have to be removed first. Never let batteries lying around openly as there is the danger that
these can be swallowed by children or domestic animals. Immediately consult a doctor when batteries are
swallowed! Leaking or damaged batteries can cause irritations when getting into contact with the skin. In this
case use appropriate protective gloves. Make sure that the batteries cannot be short-circuited, thrown into
the fire and be charged. There is a danger of explosion.

OPERATING DETERMINATIONS

The LED fiber lights FIB-203 and FIB-206 serve for decorative lighting. The running speed of the color
change of model FIB-203 can be adjusted with the control unit. Model FIB-206 includes a remote control
which allows convenient selection of integrated programs, color fades, color switching, flashing and a variety
of single colors. The control units require an operating voltage of 5 V or 9 V direct current, supplied by the
included power units. The power units are allowed to be operated with an alternating voltage of 230 V and
100-240 V, 50/60 Hz.
This device is designed for professional use, e.g. on stages, in discotheques, theatres etc. or also for home
use. Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that
the device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device. When choosing the
installation spot, please make sure that the device is not exposed to extreme heat, moisture or dust. There
should not be any cables lying around. You endanger your own and the safety of others!
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. This device must only be operated in an altitude between -20 and 2000 m
over NN. Never use the device during thunderstorms. Over voltage could destroy the device. Always
disconnect the device during thunderstorms. The maximum ambient temperature Ta = 45° C must never be
exceeded. The symbol - - -m determines the minimum distance from lighted objects. The minimum
distance between light-output and the illuminated surface must be more than 0.1 meters.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons! If this
device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
8/10 00088749.DOCX, Version 1.5