AVANCIS PowerMax SMART Installationsanleitung Seite 10

AVANCIS POWERMAX
SAFETY, INSTALLATION AND OPERATION MANUAL
Content
General Information
Handling Safety
Installation Safety
Fire Safety
Mechanical Installation
Electrical Installation
Grounding of PowerMax
Functional Grounding
Backside Mounting
Frontside Mounting
Electrical Ratings of the V NCIS PowerMax
Operation
Disclaimer of Liability
W RNING! ELECTRIC L EQUIPMENT
AVANCIS PowerMax
from sunlight. This manual provides very important safety, installation and operating information. Please make sure you are
familiar with this information before handling, installing and operating PowerMax
installing and operating PowerMax
The entire PV system must be designed,
installed and commissioned by a licensed
and qualified electrotechnical profession al
unless local codes determine otherwise.
Follow all applicable PV system design
guidelines, because these guidelines are
not covered by this document. AVANCIS
recommends use of electrical and me-
chanical components and tools suitable
and qualified for use in PV systems. Instal-
lation and operation of these components
are also not covered by this document.
10
©2013 | AVANCIS GmbH & Co. KG | Solarstrasse 3 | 04860 Torgau | Germany | E-mail: service@avancis.de | www.avancis.de | January 2013
® PHOTOVOLTAIC MODULES
® Back Rails
® Modules after light soaking (10 kWh/m²)
® photovoltaic (PV) modules are designed for outdoor use to produce direct current (DC) electrical energy
® modules.
Please make sure you follow precisely the
instructions being given by the suppliers
of these components.
PowerMax
problem should be removed from the PV
system by a qualified person and be re-
turned to AVANCIS for inspection and
subsequent actions as described in the
AVANCIS LIMITED WARRANTY FOR PV-
MODULE(S).
® modules. Avoid all hazards when handling,
® modules with a suspected
Page
11
11
11
12
12
12
13
13
13
13
14
14
14