R&G LP0234BK Montageanleitung

FITTING INSTRUCTIONS FOR LP0234BK LICENCE PLATE BRACKET
Page | 1
Please note that the way the kit is packed does not necessarily represent the way of mounting to the bike.
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
HONDA X-ADV '17-
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.

Set of metric sockets, wrench and extensions.
MAXIMUM TORQUE SETTINGS
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
(
FOR CLARITY OF INSTRUCTIONS ONLY
TOOLS REQUIRED

Set of metric Allen keys.

12mm spanner.

Phillips screwdriver.

Cable cutters.

M4 Bolt = 8 Nm

M5 Bolt = 12 Nm

M6 Bolt = 15 Nm

M8 Bolt = 20 Nm
R&G Racing
www.rg-racing.com
).
Email: info@rg-racing.com