LENCO PDR-031 Bedienungsanleitung Seite 14

Press the 'Alarm' button on the front of the radio, 'Alarm 1 off 6:00' is displayed. Short press the
Select knob.
'Alarm 1 info' is displayed. Rotate the select knob to "Alarm" and short press on the select knob to
switch the alarm on- or off.
Rotate the select knob to scroll to 'frequency'. You can choose Daily, Once, Weekends or Weekdays.
Short press the Select knob to confirm you selection
Rotate the select knob to scroll to 'Wake Up Time' and short press the select knob. The Hour digits
will start to flash.
Rotate the select knob to set the desired hour and then short press the select knob to confirm.
The minute digits will start to flash.
Rotate the select knob to set the minutes and short press the select knob to confirm.
Rotate the select knob to scroll to the Alarm sound 'source'. You can choose between Buzzer, DAB+
Radio or FM. Short press the select button to confirm.
Rotate the select knob to scroll to 'duration'. You can choose 15, 30, 45, 60, 90 or 120 minutes. Short
press the Select knob to confirm.
Rotate the select knob and select 'Volume' to set the volume for your alarm. Rotate the select knob
to set the volume. (The minimum volume you can select is 4). Short press the Select knob to confirm.
Your Alarm is now ready for use.
Note: The alarm volume will increase progressively until it reaches the alarm volume you have set.
Repeat the above steps to set Alarm 2.
Snooze Function
When the alarm sounds, you can press the select knob to snooze. The default time for this function
is 9 minutes.
Note: You can press the 'Standby' button to stop the Snooze function.
Bluetooth function
Turn on the radio and short press the Mode button until Bluetooth mode is selected. Turn on the
Bluetooth, search for devices and then Select "Lenco PDR-031". Click it to pair. When connected
successfully you will hear a voice "connected".
14