m-cro MICRO X10 Originalbetriebsanleitung Seite 20

Instructions of Buttons
Notes :
1. Press and hold the power button for 3 seconds to turn the Scooter ON/OFF.
2. Automatic shutdown time of the whole Scooter: 10 minutes.
3. Cruise control: keep the current speed for 5 seconds to enter the cruise mode.
Exit the cruise mode when pressing accelerator again or brake.
ON/OFF
Speed
Speed Unit
Bluetooth
Cruise Control
Front and Rear-Light
Riding Modes
Fault
Battery
EN EN
20
Press and hold the power button for 3 seconds to
turn the Scooter ON/OFF.
This gure shows your current speed in km/h or mph.
Press the power button 3 times to change between
mph and km/h.
Once you are switching on the Bluetooth on your
phone the Bluetooth Icon will show up on the display.
Keep the speed for 5 seconds: The cruise control icon
will appear on the screen and the buzzer rings once.
Press the power button 2 times to switch on the front
and rear light.
Press shortly the power button to change between
the di erent riding modes.
In case of a product fault an error code will appear
on the display, and you will hear a continuous alarm
Five cells show the remaining battery capacity. One
cell stands for 20%.
sound.