Safety Instructions - Tell Adapter2 Schnell-Installationsanweisung

Adapter2 / Adapter2 PRO Quick Guide
MAIN FUNCTIONS OF THE MOBILE APPLICATION
• Receive Push messages with optional camera picture.
• Show status of inputs and outputs.
• Remote control of outputs.
• Show Push message and event logs.
• Show device online/offline status.
• Show signal strength and supply voltage level.
• Show device firmware version.
For more information on the TELL Control Center features,
see the TELL Control Center User Guide.

SAFETY INSTRUCTIONS

For your safety, please read carefully and follow the instructions below!
Failure to observe safety instructions may be a threat to you and your
environment!
TELL's product (hereinafter referred to as „device") has a built-in mobile
communication modem or a WiFi interface. Depending on the product
variant, the built-in modem is capable of 2G, 3G or 4G mobile
communication.
The 2G modem can use the following frequency bands:
850/900/1800/1900 MHz @GSM/GPRS
The 3G modem can use the following frequency bands:
900/2100 MHz @UMTS, 900/1800 @GSM/GPRS
The 3GA modem can use the following frequency bands:
800/850/900/1900/2100 MHz @UMTS, 850/900/1800/1900 MHz @GSM
The 4G modem can use the following frequency bands:
900/1800 MHz @GSM/EDGE, B1/B8@WCDMA, B1/B3/B7/B8/B20/B28A@LTE
The 4GA modem can use the following frequency bands:
B2/B4/B5@WCDMA, B2/B4/B5/B12/B13@LTE
The WiFi product model uses the following frequency bands:
2.4 GHz, 802.11 b/g/n
9