tell Adapter2 Schnell-Installationsanweisung Seite 5

Adapter2 / Adapter2 PRO Quick Guide
If the Cloud usage option is enabled, the device can be accessed at any time
via the cloud server. This is absolutely necessary if you want to use the mobile
application. Otherwise, it will only connect upon request sent via SMS to the
phone number of the SIM card installed in the device:
 CONNECT,PWD=device password#
(e.g.  CONNECT,PWD=1234#)
After the connection has been established successfully, the device sends
a response SMS, which contains the server contact details and the Device ID.
Registering the device identifier:
The device can be identified and accessed remotely based on its unique device
identifier. You can read and copy the device ID to clipboard in the Status
monitoring menu.
You can store the device contact details (name, device identifier, comments)
using the Add new
later, when you want to access the device remotely.
Remote access via cloud service
• Open the Adapter2 programming software.
• Click on the Connection type menu and select the Cloud
• If you have already registered the contact details of the device in the Device
register menu, select the device you want to connect to in the Device name
drop-down menu. Otherwise, select the server from the Cloud drop-down
menu, enter the Device ID of the device and the Device password.
• Click on the Connect
For further connection options, see the Installation and Application Manual of
the Adapter2.
-> Chapter 4 of the Installation and Application Manual.
button in the Device register menu, which will help you
button.
5
:
option.