Balluff BAE TO-XE-012-01 Bedienungsanleitung Seite 2

Sensor Tester
BAE TO-XE-012-01
Intended use
This Sensor Tester is used for fast field checks of the
following sensor types with operating voltage 10...30 V:
– inductive sensors
– capacitive sensors
– photoelectric sensors
– ultrasonic sensors
Description
Charger socket Micro USB
ON button
Output state
indicator
target
Battery-state
indicator
Battery
compartment
Power supply
Before first use:
1. Open battery compartment.
2. Invert battery.
Balluff GmbH
Schurwaldstrasse 9
73765 Neuhausen a.d.F.
Germany
Phone + 49 7158 173-0
Fax +49 7158 5010
balluff@balluff.de
www.balluff.com
www.balluff.com
Declaration of Conformity
The CE Marking confirms that our products
conform to the EMC Directive no. 2014/30/EC
and the EMC Law.
Terminals
Technical Data
Connection for sensortype
Maximum sensor current drain
Power supply
Indicators
Swiched output (PNP / NPN)
Operating voltage
Replace battery
– Automatic PNP/NPN recognition
– Built-in step-up voltage converter
– Built-in steel target (non-standardized)
for checking inductive sensors
– LED and acoustic indicators
– Automatic switch off after approx.
120 sec. of non-use
ATTENTION!
Use only LiPo 9v (min 500mAh) or
Alkaline 6LR61 9V.
Do not charge Alkaline 6LR61 9V!
PNP and NPN
NC and NO
max. 100 mA
Akku LiPo 9 V
600 mAh
LED yellow
LED green
LED green blinking
2