Elmi culla-chair Bedienungsanleitung Seite 42

culla-chair
by elmi
culla-chair is delivered in one part. The single pants are: base with caster wheels and brakes,
upper part with nest-like seating, head cushion, reduction cushions if necessary, footrest.
The soft cover in terry towel, lamb's wool or artificial lamb fur can be put over the seating and easily
fixed with velcro at the back on two sides and in front.
MAINTENANCE AND TECHNICAL DATA
Wheel dimensions:
wheel dimensions front: 125 x 30 mm indoor, 125 x 30 mm outdoor
wheel dimensions rear: 150 x 30 mm indoor, 400 x 40 mm outdoor
Max. user weight: 150 kg
Accessories
For any substitutions of accessories please refer to the instructions. Remember that for dismounting
follow the instructions in inverse order.
Maintenance:
Maintenance has to be performed by the dealer or its representative once a year.
SPARE PARTS
Never make any substitutions of parts or accessories while the patient is using culla-chair!
Any product liability from the side of the manufacturer (Elmi Srl, Zona Artigianale 25, 39052
Caldaro, BZ, Italy) is excluded from the beginning in such cases.
For questions on spare parts and accessories please contact your authorized dealer or the
manufacturer directly.
tel: 00390471961002 or via e-mail: info@elmi-reha.it.
Environmental factors:
All packing materials are recyclable, as carton and paper are used.
If plastic foils are eventually used they are made in PE and therefore also recyclable.
42 ENGLISH