Herunterladen Diese Seite drucken

Bosch EasyComfort TDS65 Serie Gebrauchsanleitung Seite 21

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Problem
Water lows
through the holes
on the soleplate.
Dirt comes out
through the
soleplate.
The "Calc'nClean"
indicator light (2)
does not turn off.
The appliance
makes a pumping
sound.
Loss of pressure
during ironing.
Water spots
appear on the
garment during
ironing.
The hose gets hot
during use.
Water leakage
from the boiler.
The "Water tank
empty" indicator
light (3) comes on.
If the above tips do not solve the problem, get in touch with our customer service.
You can download this manual from the Bosch local homepages.
* Model dependent
Possible causes
1. The water is condensing
inside the tubes because
steam is being used for the
irst time or has not been used
for a long time.
1. There is a build up of
limescale or minerals in the
boiler and iron.
2. Chemical products or
additives have been used.
1. The iron descaling process
has been stopped before
being completed.
1. Water is being pumped into
the steam tank.
2. The sound does not stop.
1. The steam release button has
been activated for too long a
period of time, meaning it has
been pressed too frequently.
1. May be caused by steam
condensed on the ironing
board.
1. This is normal. It is caused by
the steam passing through the
hose during steam ironing.
1. Boiler cap (8) is loose.
1. The water tank is empty or not
correctly itted onto the
appliance.
Solution
1. Point the iron away from the
ironing area and press the
steam release button until
steam is produced.
1. Carry out a cleaning cycle
(see the "Descaling process"
section).
2. Never add products to the
water (see the "Filling the
water tank" section).
Clean the soleplate with a
damp cloth.
1. Restart and complete the iron
descaling process.
1. This is normal.
2. If the sound does not stop, do
not use the steam station and
contact an authorised
technical service centre.
1. Use the steam release button
at intervals.
1. Wipe the textile cover of the
ironing board, and iron any
water drops to dry them.
1. Place the hose on the
opposite side so that you do
not touch the hose during
ironing.
1. Tighten the cap.
1. Fill the water tank or it it
correctly.
21
B OS CH

Werbung

loading

Diese Anleitung auch für:

Easycomfort 6 serieEasycomfort tds6540