Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Lenord + Bauer
2
Safety instructions
2.1
Designated use
The GEL 293 encoders are intended exclusively for measurement tasks in the industrial
and commercial realm. It is to be installed in a system and requires the connection to
special evaluation electronics that can process the output signals.
Any other use is not a designated use.
2.2
Notes for operators and manufacturers
Personnel training
Make sure that the following requirements are met:
– Assembly, operation, maintenance and removal tasks are performed by trained
and qualified skilled personnel or are checked by a responsible specialist.
– Personnel has received training in electromagnetic compatibility and in handling
electrostatic-sensitive devices.
Provide personnel with all applicable accident prevention and safety regulations.
Make sure that personnel is familiar with all applicable accident prevention and
safety regulations.
2.3
Modifications and conversions
Unauthorised modifications or conversions may damage the product.
Do not make any modifications or conversions to the product, with the
exception of activities described in this documentation.
2.4
Rotating parts
Risk of injury due to rotating shafts
Hair and clothing can become entangled on rotating shafts. Prior to all
work on the encoder, switch off the operating voltage for the drive shaft
and secure the supply against switching back on!
2.5
Instructions for preventing damage and malfunctions
The encoder is of a very robust design. Nevertheless, it can be damaged by incorrect
mechanical loading. Mechanical damage can quickly result in the failure of the meas-
uring system.
2.5.1
Handling the encoder
Do not hit or step on the housing or the shaft.
Do not open the encoder and do not dismantle it.
GEL 293
Designated use
2 Safety instructions
27
Werbung
