RND lab RND 560-00264 Bedienungsanleitung Seite 2

Boot
First insert the power cord connector into the power cord connector at the back of the machine, and then
insert the power cord plug into the power socket. Turn on the power switch on the back of the machine:
1. Temperature Control Optional
2. Function Key
3. Soldering iron connector
4. Temperature control key
5. Hot-Air Pencil connector
2
EN
EN
6. Vacuum Connector
7. De-soldering Iron connector
8. Switch
9. Power Cord connector
Features
• Suitable for lead free soldering applications
• Variable temperature control via LCD touch screen
• Zero switching circuitry for spike suppression
• High idle stability
• Fast heat recovery
• Interchangeable handle
• Three channels for stored temperature presets
Introduction
Thank you for purchasing the soldering / de-soldering LCD touchscreen station – the best solution for your
soldering equipment needs especially for lead free applications! We believe that you will be more than
satisfied with many features and the versatility of your new soldering station. Please carefully read the
instruction manual prior to operation to maximize the advantages of using your new soldering station.
Warning:
This appliance is not intended for use by children or inform persons without assistance or supervision if their
physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to
ensure that they do not play with the appliance. Failure to observe this safety regulation could result in a risk
to life and limb. The manufacturer or supplier shall not be liable for damage resulting from misuse of the unit
or unauthorized alterations.
Caution:
• Always place the soldering and De-soldering iron in its original holder when not being used.
• Keep the soldering and de-soldering tip and heating element away from the body, clothes and flammable
material when in operation.
• The soldering tip and the heating element remain hot for some time after being switched off. Ensure that
you do not touch the soldering tip and the heating element.
• For your health, do not inhale solder fumes.
• You must not undertake work on live parts. Only a technician is recommended to undertake repairs. Use
original replacement parts only.
EN
EN
3