Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.1 Setting up the sensors
To set up a sensor, briefly tap the display of
the sensor. Each sensor has an ID, which consists
of 5 characters.
You can enter the ID manually using the keyboard or
use the camera to read the QR code on the sensor:
Installation and operating instructions – english
7.2 Basic settings
You can access the settings using the menu button
(three horizontal lines) in the upper right-hand corner
of the app window. Use the sliders to set the warning
limits for the tyre pressure. For vehicles with two
axles, you can define different values for front and
rear axle. The app receives data even when running in
the background. Under „Notify" you define whether
the app displays a message when a limit is exceeded.
Note:
The temperature-warning
limit is fixed at 100 °C and
cannot be changed.
15
Werbung
