Herunterladen Diese Seite drucken

KNOTT TireControl Montageanweisung Und Bedienungsanleitung Seite 11

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Product Introduction
The tyre pressure control system TireControl determi-
nes the tyre pressure and temperature while driving
and transmits both values to a smartphone by means
of an integrated Bluetooth interface. If the measure-
ments are above or below a preset limit, the app will
issue an acoustic/optical warning message.
• Easy installation of the external sensors
(tool is included)
• Convenient display of sensor values via
free KNOTT app
• Adjustable warning limits for too high /
too low air pressure
• Tyre temperature monitoring
• Acoustic and visual warning of exceeded limits
• Warning of rapid pressure drop or weak sensor
battery
• Replaceable battery (CR1632)
• Mechanical anti-theft device
• Simultaneous display of 2, 4 or 6 sensors
Installation and operating instructions – english
2. General information
It is essential to read these instructions carefully
before installation / operation and to store them in
the vehicle ready for use!
The installer is responsible for proper and appropria-
teinstallation. The assembly is to be carried out with
the supplied tool. Correct operation is only guaran-
teed if installed correctly.
The tyre pressure monitoring system TireControl is
an additional display system for vehicles and trailers
which do not have a control system as standard equip-
ment. It may not be used as a substitute for a legally
prescribed monitoring system.
KNOTT reserves all rights. This installation and
operating instructions and their content may not be
reproduced by printing, photocopying, on microfilm
or in any other electronic or mechanical way without
the prior written approval of KNOTT.
11

Werbung

loading