Wahoo KICKR BIKE SHIFT Montageanleitung Seite 10

KICKR BIKE SHIFT SETUP
6. Attach the main shifter cable magnetically to the bod located underneath the stem.
KICKR BIKE SHIFT has two LEDs to indicate its power and connection status.
7. Insert the seatpost assembly into the KICKR BIKE SHIFT by
loosening/tightening the rear extension quick release.
10
Blue LED slow blink- standby mode
Blue LED solid - application connected
Blue LED solid + fast blink - control commands
White LED slow blink - searching for networks
White LED fast blink - connecting to a network
White LED solid - connected to network
Blue and White LED off - Sleep mode (after
15min) or power disconnected
1
3
2