Rollei Wireless Security Cam 2K Anleitung Seite 31

Important Note!
Furthermore, we would like to point out that before passing on your
security camera to a third party (e .g . by selling it), you must reset
the security camera to its factory settings using the reset button (see
the note in the manual) .
This is the only way to ensure that all your personal data has been
irrevocably deleted .
If you have any questions, please do not hesitate to contact our
technical support .
Explanation of Symbols
The following symbols are used in this manual, on the Rollei Wire-
less Security Cam 2K, or on the packaging .
Products marked with this symbol comply with all relevant
community regulations of the European Economic Area .
Products marked with this symbol are operated with direct
current .
Products marked with this symbol are operated with
alternating current .
Products with this symbol have additional or reinforced
insulation and comply with protection class II .
For indoor use only . Devices with this symbol may only be
operated indoors (dry environment) .
31