Siemens TQ505R09 Gebrauchsanleitung Seite 50

en Before using for the first time
Fill coffee bean container
ATTENTION!
Unsuitable beans can block up the
grinder.
▶
Only use pure, roasted bean mixes
that are suitable for use in fully auto-
matic coffee or espresso machines.
▶
Do not use glazed coffee beans.
▶
Do not use caramelised coffee
beans.
▶
Do not use coffee beans that have
been treated with additives contain-
ing sugar.
▶
Do not add ground coffee.
Open the lid.
1.
Fill with the coffee beans.
2.
The appliance will adjust to the cof-
fee beans with the next dispensing
process.
Close the lid.
3.
Tip: To keep the coffee beans at their
best, store them in a sealed container
in a cool place.
You can keep the coffee beans in the
bean container for a number of days
without them losing their aroma.
Setting the language
Press to switch the appliance on.
1.
The display will show the language
a
that is preset.
Press or
2.
shows the desired language.
Press ⁠ .
3.
Tip: You can change the language at
any time.
→ "Overview of the basic settings",
Page 57
Setting the water hardness
It is important to set the water hardness
correctly, so that the appliance indic-
ates in good time that it needs descal-
50
until the display
ing. You can use the enclosed test strip
to determine the water hardness, or
ask your local water company.
Briefly dip the test strip in fresh tap
1.
water.
Allow the water to drip off the test
2.
strip.
The test strip will indicate the water
a
hardness after 1 minute.
If a water softening system is in-
3.
stalled in your house, select "Soften-
ing system".
Press or
4.
shows the desired water hardness.
The table shows the allocation of the
levels to the different degrees of wa-
ter hardness:
Level German de-
grees in °dH
1 1-7
2 8-14
3 15-21
1
4 22-30
1
Factory setting (may vary according to
model)
Press ⁠ .
5.
Check whether the bean container
6.
has been filled.
Press ⁠ .
7.
The appliance now rinses itself.
a
When the symbols for drink selection
a
and the buttons light up on the oper-
ating panel, the appliance is ready
for use.
Tip: You can change the water hard-
ness at any time.
→ "Overview of the basic settings",
Page 57
until the display
Total hard-
ness in
(mmol/l)
0.18 - 1.25
1.42 - 2.49
2.67 - 3.74
3.92 - 5.34