Landxcape LX835i Benutzerhandbuch Seite 20

Blade disc blocked
Landxcape
Landxcape
Landxcape
down.
Battery error
It takes too long for
Landxcape
the charging station.
This could be because your
router lost its power or
because you changed your
Wi-Fi router or network
provider.
Error unknown.
NOTES
• Before turning power on, always return Landxcape
TM
Landxcape is sitting over the boundary wire when turned on.
• If for any reason—i.e. a party, children playing...—you want to park your Landxcape
will go to its charging station and stay there. Or press
• If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary wire. Please refer to the Installation
Guide and check your set up with its help.
• If your lawn is divided in two separate areas connected by a corridor less than 1m, one of which is not provided with the charging station: when
TM
Landxcape runs out of charge, take it manually to the charging station, the charge process will start.
TM
• If Landxcape runs abnormally once in a while, please try to restart it. If the problem is not resolved, try to removing and reinstalling the
battery . If the problem is still not resolved, please contact a Landxcape
• Do not wash your Landxcape
11. Troubleshooting
TM
If your Landxcape does not work correctly, follow the troubleshooting guide below. If the issue persists, contact your Dealer.
20
1. Turn Landxcape
2. Turn Landxcape
rotate.
3. Remove any obstruction.
4. Turn Landxcape
height;
5. Turn Landxcape
1. Turn Landxcape
2. Take Landxcape
3. Turn Landxcape
TM
is trapped.
4. If the error message is still displayed; turn power off; turn Landxcape
Check if there is anything preventing the wheels from rotating.
5. Remove any obstruction, turn Landxcape
1. Turn Landxcape
2. Take Landxcape
then .
TM
is lifted up. 3. If the error message is still displayed: turn Landxcape
down and check if there's anything preventing the front wheels from rotating.
4. Remove any possible object, turn Landxcape
then .
TM
is upside
Turn Landxcape
1. Check the battery temperature. If the temperature is too high, wait until the
temperature has cooled down. Press
2. If the error message is still displayed, replace a new battery. Restart Landxcape
Press
3. If the error repeatedly occurs, try to change the working schedule.
Manually dock Landxcape
TM
to go back to fully charged, Press
Refer to the installation manual.
Please reconnect Landxcape
If this is not possible, contact Customer Service.
Restart Landxcape
contact a service agent for help.
TM
to its territory. If not, "
to turn Landxcape
TM
with a high pressure washer. This could cause damage to the battery or the machine.
TM
off.
TM
upside down and check if there's anything preventing the blade disc to
TM
upright and take it to an area with short grass or adjust the cutting
TM
on. Press then .
TM
off;
TM
to an area in your lawn free of obstacles obstacles.
TM
on. Press then .
TM
TM
off.
TM
to a lawn area clear of obstacles, turn Landxcape
TM
upright. Press then
then
then .
TM
in the charging station for charging. After Landxcape
then .
TM
to the Wi-Fi network it has been originally paired with.
TM
. Press then . If the error message is still displayed,
" will be displayed. This message is also displayed when
TM
in the charging station: Press
TM
off.
TM
service agent for help.
TM
upside-down.
upright, turn power on. Press then
TM
on. Press
TM TM
off, turn Landxcape
TM TM
upright, turn Landxcape on. Press
.
.
then . Landxcape
.
upside-
TM
.
TM
is
TM
EN