Sundirect Smart2.0Pro Montageanleitung Seite 8

Step1: Connect Smart2.0Pro to electricity, make sure Wi-Fi signal on
Smart2.0Pro is rapidly flashing (if not please power off Smart2.0Pro and long
press the "PRG" button until Wi-Fi signal is flashing rapidly). Open APP on
smartphone and add device by pressing "+" on top right of APP.
Step2: Enter the Wi-Fi password of your home network. Please make sure
your home Wi-Fi is working and keep the Smart2.0Pro and smartphone/tablet
as close as possible to the Wi-Fi router. Please note that our APP only
works with a 2.4GHz network, it doesn't support 5GHz networks
currently. Also, make sure your internet router has enough capacity to
add a new device.
Step3: Wait until connection status shows 100% to finish setting. The Wi-Fi
signal on control box will stop flashing now.
If you failed to connect, please power off Smart2.0Pro, long press the "PRG"
button on thermostat until Wi-Fi signal is flashing slowly and repeat
connection process.
If you still have issues with internet connection, please try to reset to factory
mode.
5. Technical specifications
Model
Frequency
Temperature range
Accuracy
Protection
Smart2.0Pro
433Mhz
5-40℃
0.1℃
IP20
8