Switching On/Off - Eschenbach magno DIGITAL Bedienungsanleitung

The charging status of the internal battery is shown at the top screen border when the device is switched on.
Battery completely charged
Residual capacity 25%, the symbol is displayed in red at the top screen border for
5 seconds
Residual operation time approx. 3 min, the symbol is displayed in red at the top screen
border permanently

Switching on/off

Press and hold the On/Off button (t) for a second to turn on the magno DIGITAL and to switch to live image mode. The
magnified image of the subject material is shown on the display (q). Symbols display the battery charging status, the
magnification last set and the screen brightness for 5 seconds at the top screen border.
The magno DIGITAL switches itself off automatically if it is not used for more than 3 minutes in order to save the internal
battery charging status. If you want touse the device again, switch it on again.
To switch the device off, press and hold the On/Off button (t) for around one second. The current settings for magnifica-
tion, display mode and display brightness will be saved.
Capacity 75 %
- 23 -
Capacity 50 %