Werbung
Verfügbare Sprachen
Verfügbare Sprachen
surfaces.
EN
CAUTION: In rainy or wet weather, braking distances are extended.
VIBRATIONS
When using an electric scooter, vibrations can occur due to a variety of factors such
as the quality of the road surface, the condition of the tires, the speed of the scooter,
and the quality of the suspension. Uneven or rough roads, poorly inflated or damaged
tires, high speeds, and poor suspension can all contribute to vibration on the unit.
CABLES
Make sure that the cable ports are not loose or broken.
SCREWS
Check the screws in the main components and tighten them regularly. Riding the
device causes vibrations that loosen the screws over time.
4.3. CLEANING YOUR DEVICE
Follow these instructions and precautions for cleaning the device:
• Unplug all the device's charging cables before cleaning it.
• Never immerse in water.
• Do not use a high-pressure cleaner, water jet or any other appliance or washing
method that would allow water to seep into the device.
• Clean the device with a sightly damp sponge or a soft cloth, avoiding the connectors
and buttons and making sure water is not allowed to seep into the plugs, circuits or
inside the product.
• Do not use water or liquid cleaners directly on the device to clean it.
• Do not use abrasive products or solvents as these could damage the paint on your
device.
• Be careful when cleaning and wiping plastic parts.
• Do not use abrasive products or solvents to clean metal or plastic parts.
4.4. STORING YOUR DEVICE
• Fully charge your device before storing it.
• Store your product indoors in a clean and dry place, not exposed to the elements,
with an ambient temperature ranging from 0°C to 40°C.
When stopping or charging, be sure to store your scooter flat.
•
20
Werbung
