yeep.me 00c Bedienungsanleitung Seite 13

• To turn the device on and off: use the starter key provided with the unit. The
EN
device turns off automatically after 180 seconds of inactivity.
• To change speed modes: briefly press the speed change button (20).
There are 3 speed modes:
• Mode 1 (13)., PEDESTRIAN mode, limited to 6 km/h.
• Mode 2 (13)., the ECO mode, limited to 15 km/h.
• Mode 3 (13)., the SPORT mode, is limited to 25 km/h.
When mode 1 is activated, the pedestrian icon (14). will be lit.
3.2. UNPACKING AND ASSEMBLING THE DEVICE
To unpack the product, it is recommended to have a clear surface that is
large enough to unpack and prepare the device. Take the device out of its
packaging, making sure to not injure yourself or damage other products or
your surroundings. Have someone help you if the product is too heavy for you
to handle on your own (the weight of the device is indicated on the packaging).
Before using the product, the handles must be assembled. To do this, unfold
the device (see following sections) and install the brake lever and the handles
as per the following instructions:
An adult must unpack and assemble the device.
1. Before screwing on the handles, install the braking lever (3). on the left-
hand side and adjust the position of the brake lever by screwing it on once the
handles have been installed.
2. Use the markings on the handles to help you. R marks the right-hand
handle and L marks the left-hand handle.
3. Screw on each handle in alignment with the handlebar axis. Do not tighten
or apply force if the handle is crooked. It should be possible to tighten the
handle without applying force.
4. Ensure you have properly tightened the handle once it reaches the stop.
13