Operation; Cleaning And Maintenance - Create CURLER CERAMIC Bedienungsanleitung

• For the best result, hair should be clean and free from dirt,
hair spray and hair cream, etc. Please dry your hair with a
cloth or dryer until making sure that there is no extra water
dropping from the hair.
• This professional hair waver is applicable to both dry and
damp hair.
1. Rest the waver on a smooth, flat surface and plug in the
power cord. Never put the appliance on a surface that is not
heat-resistant when it's heating up and when it's hot.
2. Turn on the device by pressing the on/off switch and press
the temperature control button to select from 120-200 ºC.
Never leave the appliance unattended when it's plugged in.
3. The appliance will reach 200 ºC in 90 seconds. A lock sym-
bol will appear on the display after 8 seconds and then the
on/off button and temperature control button will be locked.
Long press the on/off switch for 2 seconds to unlock them.
4. Comb or brush your hair so that it's disentangled and
smooth.
5. Work with hair sections that are about 2'' wide and 1/4''
deep. Place hair between the heating plates and press down
firmly. After 8 seconds, the appliance will make a beeping
sounds to alert the user that the curling is over.
6. Repeat the process until the desired hairstyle is achieved.
Let the hair cool before final combing.
7. Press the lock-in close switch to close the waver for storage
after it has cooled down.
1. Make sure the appliance is switched off and unplugged.
2. Let the appliance cool down completely on a heat-resistant
surface. Never wind the power cord around the appliance.
3. Clean the appliance with a damp cloth.
4. Use the lock-in close switch to lock the heating plates be-
fore storing the appliance.
5. Place the waver in a heat-resistant pouch for easy storage
and portability.
This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable re-use of material resources. To
return your used device, please use the return and collection
systems or contact the retailer from where the product was
purchased. They can take this product for environmental safe
recycling.
8 E NGL I SH

OPERATION

CLEANING AND MAINTENANCE