Bosch GTA 2500 W Professional Originalbetriebsanleitung Seite 20

OBJ_BUCH-854-004.book Page 20 Friday, June 11, 2010 1:22 PM
20 | English
Assembly
Delivery Scope
Please also observe the represen-
tation of the delivery scope at the
beginning of the operating instruc-
tions.
Before assembling the saw stand, check if all
parts listed below are provided:
No. Designation
Attachment set
1
Saw stand with support 8
2
Upper frame
13
with lock 3
Bottom frame
17
Foot lever
14
Wheel "L"
15
Wheel "R"
16
Supporting frame
18
Fastening kit
19
consisting of:
– Hexagon bolt
M10 x 100
M10 x 55
M10 x 50 (self-locking)
M8 x 45
M6 x 45
– Phillips screw
M8 x 50
– Washer
M10 x 29 mm
M10
M8
M6
– Lock nut
M10
M8
M6
Additionally required tools (not in delivery
scope):
– Phillips screwdriver
– Open-end spanner (10 mm, 8 mm, 6 mm)
– Adjustable spanner
1 609 929 W41 | (11/6/10)
Assembling the Mobile Stand Base
– Carefully remove all parts included in the de-
livery from their packaging.
– Remove all packaging material. (e. g. cable
ties, etc.)
– For assembly, follow figures A – E. Also ob-
serve the following notes.
For Fig. B:
The wheels are marked for easier assembly ("R"
for right wheel, "L" for left wheel).
Quantity
Note: Do not over-tighten the nuts. Parts bolted
2
together must move freely.
1
For Fig. D:
Observe the correct assembly direction of sup-
1
porting frame 18, which is indicated by the
1
marks "R" and "L" matching the wheels.
1
Note: Do not over-tighten the nuts. Parts bolted
together must move freely.
1
1
For Fig. E1:
1
In this assembly step, the saw stand 2 is bolted
together with the supporting frame rest 18 and
the upper frame rest 13.
– Set both rest so that the lateral recesses in
4
the rests face towards the handle.
1
– While bolting the saw stand together, take
2
care that the support 8 is always in the fix-
4
ture of the bottom frame 17.
8
Note: Only hand-tighten the nuts at first. After
4
all eight bolts are correctly positioned, they can
be firmly tightened.
2
For Fig. E2:
10
4 Note: Do not over-tighten the nuts. Parts bolted
8
together must move freely.
5
4
8
Bosch Power Tools