Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3) Remove
Method 1. From your Zigbee hub interface, choose to delete or reset the device as instructed.
Method 2. Remove from the Device, see below instructions.
Step 1. Press the reset
button for 3 times.
4) TouchLink
Step 1. Press the reset
button for 4 times.
Step 3. Bring the remote
within 10cm of the smart
dimmer and set the remote
into TouchLink
commissioning.
Step 2. The indicator will
start blinking purple and
stays solid for 10s when the
device is removed, timeout
3mins.
Step 2. The indicator will
start blinking green and
stays solid for 10s when
pairing succeeds, timeout
15mins.
Step 5. The light will
blink 10 times when
touchlink succeeds
17
Werbung
Inhaltsverzeichnis
