EcoDim 07 Zigbee Pro Bedienungsanleitung Seite 17

4. MIN adjustment
For the SMART dimmer to work optimally, you can adjust the lights to the dimmer with the MIN
adjustment. As soon as you start turning MIN adjustment, the dimmer will automatically go to the
minimum light range.
Set MIN: You switch on the lamps with the push/turn button. When the lights are on, put a
screwdriver in the MIN and turn the potentiometer to the left. When the light becomes unstable,
turn back slightly to the right so that the light remains stable.
5. Connecting home automation/app
Step 1: Switch on the dimmer (lights are on). The dimmer is already in "pairing mode". You can
also do this by pressing the reset button on the dimmer twice.
Step 2: Make sure that the pairing mode of your controller is on during the previous step. Please
refer to the manual of your controller on how to do this.
Step 3: The dimmer will be visible in your app and the previously set MIN position will be stored
there.
Other manuals concerning the connection of the EcoDim smart dimmer with various known
controllers can be found on this page:
Enter www.ecodim.nl/downloads-smart-dimmer
14