Coccolle Nova Bedienungsanleitung Seite 11

EN
First loosen harness. Pull up the headrest height adjuster at the same time
move headrest to shoulder height in accordance with the size of the child.(fig.9)
4.4 Adjusting recline positions
Pull Recline lever at the same time incline seat to intend position.(fig.10)
CAUTION! Adjust to most reclined position when installed rearward facing.
4.5 Rotating seat
Rearward facing - Only for group 0+ (fig. 11)
Forward facing - Only for group I II III (fig. 12)
Lateral facing - For child sit convenience - Forbidden to use when driving (fig.
13)
Press down rotation button at the same time rotate seat to intend direction.
(fig.14,15)
When seat rotates to intend direction, rotation button will bounce and make click
sound. Then try to rotate seat to make sure seat is locked.
(fig.16)
4.6 Adjusting ISOFIX
If your vehicle is not equipped with the ISOFIX insert guides as standard, clip
the two insert guides which are included with the seat. with the cut-out facing
upwards onto the two ISOFIX attachment points of your vehicle. (fig. 17)
TIP: The ISOFIX attachment points are located between the surface and the
backrest of the vehicle seat.
4.6.1 ISOFIX installation
On both sides of the seat squeeze the ISOFIX button and pull out ISOFIX
connectors in longest position.(fig.18,19)
Slide the two ISOFIX connectors firmly into the insert guides until the ISOFIX
connectors engage with a clicking noise on both sides. The ISOFIX button must
turn green on both sides. (fig.20,21)
CAUTION! The ISOFIX connectors are only correctly engaged if both of the
ISOFIX buttons are green
Push the child seat towards the backrest applying firm, even pressure on both
sides. Shake the child safety seat to make sure it is safely attached and re-
check the green safety buttons to make sure that both of them are completely
green.(fig.22)