Werbung
Getting to know your appliance
en
*Getting to know your
appliance
T he instruction manual is the same for various different
G e t t i n g t o k n o w y o u r a p p l i a n c e
hobs. You can find the hob dimensions in the overview
of models. ~ Page 2
The control panel
Indica-
tors
Heat settings
‚
-
Š
Residual heat
•
/
œ
Timer
‰‰
Touch controls
Main switch
#
Child safety lock
1
Hotplate selection
$
Adjustment fields
A@
Automatic zone control
ó
Timer
3
Notes
When you touch a symbol, the respective function is
■
activated.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Do not pull pans close to the displays and sensors.
■
The electronics could overheat.
The hotplates
Hotplate
Single-circuit hot-
$
plate
Dual-circuit hotplate
ð
32
Activating and deactivating
Select the hotplate and touch the
symbol
Hotplate
Extended cooking
î
zone
When the hotplate is activated: The corresponding display lights up
Switching on the hotplate: The previously set size is automatically
selected.
Notes
Any dark areas in the glow pattern of the hotplate
■
are due to technical reasons. The function of the
hotplate is not affected.
Hotplate temperature is regulated by the heat
■
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
– sensitive components are protected from
overheating
– the appliance is protected from electrical
overload
– better cooking results are achieved
With multi-circuit hotplates the heater elements of the
■
inner filament circuits and the heater element of the
activations may switch on and off at different times.
Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate.
If
appears in the display the hob is still hot. It may be
•
used, for example, to keep a small meal warm or to
melt cooking chocolate. As the hotplate cools down
further, the display changes to
ó
until the hotplate has cooled sufficiently.
Activating and deactivating
Select the hotplate and touch the
symbol
. The display remains lit
œ
ó
Werbung
