Nebula Cosmos Laser Bedienungsanleitung Seite 12

Positioning Your Projector
You can position your projector in the following ways.
• Front: The projector is placed on the table in front of the screen.
This is the most common way to position the projector for quick
setup and portability.
• Rear: The projector is placed on the table behind the screen. A
special rear projector screen is required.
• Front Ceiling: The projector is suspended upside-down in front
of the screen. The ceiling/wall mount kit is required.
• Rear Ceiling: The projector is suspended upside-down from
behind the screen. A special rear projector screen and ceiling/
wall mount kit are required.
T
• After powering on the projector, press the Settings button on
the projector, then go to Advanced Settings > Projector Mode
and select a setting.
• It is unnecessary to tilt the projector toward the projection
surface. This device is featured with autofocus and auto-
keystone correction.
• You may also install the projector onto a tripod (sold
separately) if necessary.
• The distance between the projector lens and the screen
determines the projection image size.
Screen Size
60 inches
70 inches
80 inches
90 inches
100 inches
110 inches
10
Distance Between Projector Lens and Screen
1.68 m / 5.51 ft
1.97 m / 6.46 ft
2.25 m / 7.38 ft
2.53 m / 8.30 ft
2.81 m / 9.22 ft
3.10 m / 10.17 ft